contact
Contact Details
Topline Distribution Limited
10A Clifton Place
Marybank
Nelson 7010
New Zealand
Phone: 027 4918059
or
ECOtanka Global Limited: 03 668 5264
Form Category
To better help you with your enquiry please select
one of the forms below.
Feedback
Product Support
New Wholesale Account
Testimonial
Product Suggestion
Get In Touch with ECOtanka New Zealand
NOTE: if you have a product problem, please submit your problem from the support site so the right country and person can help with your problem, do not submit product problems here. Thank you
thermoTANKA 1200ml
ECOtanka thermoTANKA 1200ml Double Wall Vacuum Bottle
The thermoTANKA 1200ml double wall vacuum bottle is a slightly wider design (98mm wide) measuring approximately 242mm from the bottom to the top of the bottle. This bottle is perfect for people that drink a lot of water throughout the day and need more than an 800ml but not as much as a 2000ml bottle. Along with volume, the 1200ml bottle fits all the standard lids of the other sizes below this size bottle. keeping your drink cold or hot longer.
ECOtanka thermoTANKA gives you a Pure Clean Fresh drink every single time.
The vacuum properties of the thermoTANKA can keep your drink hot form 7.5-10+ hours, cold for 7-8+ hours and ICE for up to 65 hours depending on lid type.
NOTE: temperatures may vary due to lid types, outside conditions and the number of times you remove the lid.
thermoTANKA fits all of the standard ECOtanka lids (except the megaTANKA lids).

thermoTANKA 1200ml
w/S.S. bamboo lid
Finish: Brush Stainless Steel
Material: Stainless Steel 304 18/8
Logo: Black Laser

thermoTANKA 1200ml
w/S.S. classic lid
Finish: Brush Stainless Steel
Material: Stainless Steel 304 18/8
Logo: Black Laser

thermoTANKA 1200ml
w/S.S. modern lid
Finish: Brush Stainless Steel
Material: Stainless Steel 304 18/8
Logo: Black Laser

thermoTANKA 1200ml
w/S.S. 44wave lid
Finish: Brush Stainless Steel
Material: Stainless Steel 304 18/8
Logo: Black Laser

thermoTANKA 1200ml
w/screwTOP lid
Finish: Brush Stainless Steel
Material: Stainless Steel 304 18/8
Logo: Black Laser

thermoTANKA 1200ml
w/poly loop lid
Finish: Brush Stainless Steel
Material: Stainless Steel 304 18/8
Logo: Black Laser

thermoTANKA 1200ml
w/sports lid
Finish: Brush Stainless Steel
Material: Stainless Steel 304 18/8
Logo: Black Laser
thermoTANKA History
ECOtanka designed the thermoTANKA in 2008 and made the first bottle in 2009. Since then everyone liked the design and copied it, you can now see our design everywhere!! The thermoTANKA was originally designed to keep drinks colder longer due to the insulation function of the vacuum, but people like it so much they now keep your drink hot. One bottle for summer and winter!
Bottle Specifications
The specifications in this page are only for the thermoTANKA 1200ml bottles and do not include the lid or kooler cover specs. To view the material specifications for other product parts for this bottle, please visit each product page.
This product is made from Stainless Steel 304 18/8 (1.4301), Austenitic steels.
The material contains 18% Chromium and 8% Nickel
The product material is FREE from Lead and other contaminants.
This product does not contain an internal coating and is FREE from any other chemicals.
Stainless Steel Origin: China
Bottle Weight: 471grams +/- 5g
Bottle Opening: 44mm
Bottle thickness outter layer: 0.5mm +/- 0.02 (material used)
Bottle thickness inner layer: 0.4mm +/- 0.02 (material used)
Black laser printing: Laser printed to stainless steel finish only, etches the logo in a black/dark brown colour on the bottle that will never come off.
White laser printing: Laser printed information to the bottom of the bottle. This is to provide you with the material of the bottle and a number for us to know production details.
ECOtanka values quality and safety. In order to make sure that our products are 100% safe and long-lasting, we test all of our material parts that come in contact with liquid or food. Material testing is done in stages with the first major test completed by a certified independent testing lab, this is completed every 4-5 years. The second test is completed by the wholesale supplier of the raw material or the main production factory a certified independent testing lab. The third test is carried out by our own team using a number of methods as follows:
1. A stainless steel liquid colour test to confirm the stainless steel type.
2. A spectrometer test which takes an analysis of the material makeup to verify its quality.
The materials we test are as follows:
- Stainless Steel for Bottle material
- Silicone for Seal material
- PP for Plastic Lid material
- Stainless Steel for Lid material
Our testings are mostly as per EU standards. From time to time, we carry out FDA testing as well. As testing samples, we provide one product type for each material category.
To view our latest test results, please click on the following document below:
2018, July SGS Report
2018, July BV BPA & BPS Report
Care Instructions:
ECOtanka bottles are very easy to care for: simply wash and rinse well the same as for your dishes. Alternatively, baking soda and warm water can be used to cleanse and freshen your bottle. They may be sterilised with boiling water. Do not place in the freezer.
We do not recommend washing any stainless steel bottle in your dishwasher. For more detailed care instructions, please click here.
Packaging
The packaging for all ECOtanka products is 100% Plastic-FREE and environmentally-friendly. From Factory to End Consumers, Less Packaging Waste.
To learn more about our packaging, please click here.
2 Year Warranty
All ECOtankas come with a 2-year warranty against faulty manufacturing. If you have a problem with your bottle or lid, you can contact us or find out more information here: support.ecotanka.com
Extra Lids
Below are the extra lid options currently available for this bottle type. NOTE: not all lids are available at all times.
Summer Tip:
To make a drink that stays cool for hours in summer, simply fill your bottle with ice cubes, top with water. All ECOtanka bottles have a special wide mouth, allowing ice cubes to be used for an instant cold drink. Please do not place your ECOtanka 1200ml thermo bottle in the fridge or freezer it will not work.
Find the closest shop or online store to your loction
through our global "Where to Buy" directory system.
download centre
download center

@ecotankanz
Coming soon.....Grail 350ml Wine Cup
ECOtanka Grail 350ml Double Walled Cup
ECOtanka Grail Cup 350ml has been designed and moulded to the shape of a wine glass, which makes this a comfortable style cup to hold. The inside layer follows the design of a wine glass with its curved oval shape bottom, unlike other similar products.
Our advanced food-grade ceramic coating on the inside of the Grail adds to your drinking pleasure and allows you to keep the taste and quality of your wine. Adding wine to any stainless steel finish can affect the taste and in some cases can completely change the quality and flavour.
The ECOtanka Grail is double walled is made of 304 stainless steel on the outside and inside.
The ECOtanka Grail is suitable for most drinks both hot and cold due to is double wall design and ceramic coating giving it vacuum like properties. This cup is ideal around the pool, camping, travelling, for a special occasion and is dishwasher safe.
The Grail inner coating has been tested for BPA, BPS and other chemicals from an independent testing lab, see below for the test report.

Inner Ceramic Coating
The ECOtanka Grail 350ml Stainless Steel Cup has been coated on the inside with an advanced food-grade ceramic coating that has been fully tested. The Ceramic Coating adds a lot of extra benefits to the cup, with one standout benefit being the ability to have red wine in a stainless steel cup without losing the flavour and quality. The inner coating also stops the heat transfer going to the outside layer which allows the cup to be used with hot drinks.
Custom Logo Printing
Custom laser logo printing is available for the ECOtanka Grail to have your business logo printed on the cup or to personalise for a special event. Your laser printing on the cup would be either a laser "white" or "black" and this will never come off. View the custom logo printing requirements

Black Laser

Black Laser

Black Laser

White Laser
Cup Specifications
The specifications in this page are only for the ECOtanka Grail 350ml.
This product is made from Stainless Steel 304 18/8 (1.4301), Austenitic steels.
The material contains 18% Chromium and 8% Nickel
The product material is FREE from Lead and other contaminants.
This product does contain an internal coating that is FREE from chemicals.
Stainless Steel Origin: China
Cup height: 110.8mm +/- 0.2
Cup Weight: 156grams +/- 5g
Cup Diameter: 92mm
Cup Opening: 71mm
Cup thickness: 0.5mm +/- 0.02 Outside (material used)
Cup thickness: 0.4mm +/- 0.02 Inside (material used)
Logo printing to the Grail Cup only has two options.
1. "White" laser printing
2. "Black" laser printing
These two methods of printing are permanent and will never come off.
ECOtanka values quality. In order to make sure that our products are 100% safe for you to use and long-lasting, we carry out a material test every 5 years by an independent third-party lab. All parts of ECOtanka products that come in contact with your liquid or food are tested.
The materials we test are as follows:
- Stainless Steel for Cup material
- Inner Ceramic Coating Paint
Our testings are mostly as per EU standards. From time to time, we carry out FDA testing as well. As testing samples, we provide one product type for each material category.
All material batch orders are tested within the factory and all individual orders are self-tested by our own team in China using two methods as follows:
1. A stainless steel liquid colour test to confirm the stainless steel type.
2. A spectrometer test which takes an analysis of the material makeup to verify its quality.
To view our latest test results, please click on the following document below:
2018, July SGS Report
2018, November BV BPA, BPS & Chemicals Report
Care Instructions:
ECOtanka Grail is very easy to care for: simply wash and rinse well. Do not use abrasive products for cleaning the inner ceramic coating. Alternatively, due to its design, this cup is dishwasher safe.
Packaging
The packaging for all ECOtanka products is 100% Plastic-FREE and environmentally-friendly. From Factory to End Consumers, Less Packaging Waste.
To learn more about our packaging, please click here.
2 Year Warranty
All ECOtanka products come with a 2-year warranty against faulty manufacturing. If you have a problem with your ECOtanka Grail 350ml, you can contact us or find out more information here: support.ecotanka.com
Find the closest shop or online store to your loction
through our global "Where to Buy" directory system.
Wholesale Account
New Wholesale Account Form
Online Form
To apply for a wholesale account to buy and sell ECOtanka Products fill in the online form:
ECOtanka Account Application
PDF DOWNLOAD
To apply for a wholesale account to buy and sell ECOtanka Products please download the pdf form, fill it out and return it to us.
ECOtankaNZ New Wholesale Account Form
thermoTANKA 2000ml
ECOtanka thermoTANKA 2000ml Double Wall Vacuum Bottle
ThermoTANKA 2L is ideal for the whole family and is the perfect bottle for all outdoor activities, especially for those working outdoors.
The thermoTANKA 2L can be filled with ice and your preferred drink to keep it cold all day. This holds a volume of 2 litres (8 standard size glasses), and measure approximately 268mm from the bottom to the top of the stainless steel area.
The thermoTANKA 2L shares the same lid size as the megaTANKA single wall bottle which gives you 2 lid types, poly spout lid and full stainless steel lid. The 2-litre range is the only bottles that do not fit the standard ECOtanka lid range.
The vacuum properties of the thermoTANKA 2L can keep your drink hot for 7.5-10+ hours, cold for 7-8+ hours or longer depending on lid type, how often the lid is removed, outside temperatures and by adding ice.

thermoTANKA STAINLESS
w/2L mega PP lid
Volume: 2000ml
Stainless Steel 304 18/8
Logo: Black Laser

thermoTANKA STAINLESS
w/2L mega S.S. lid
Volume: 2000ml
Stainless Steel 304 18/8
Logo: Black Laser
2L MEGA PP and 2L MEGA Stainless Steel Lid Options
The 2L MEGA PP lid is a big lid that has been well designed for this bottle size. The lid has a good grip all the way around the lid so you can get it tight to make sure it is sealed. The spout has been designed so you can pour or drink directly from the bottle and the spout stopper/cover has a second seal that is easy to click lock so the spout will not leak. Also, the cover folds completely back which makes drinking directly from the bottle easier.
The 2L MEGA Stainless Steel lid is an alternative to the 2L MEGA PP lid. This lid is a 100% pure stainless steel that fits over the outer rim of the bottle along with a wide pure stainless steel handle for easy holding.




Bottle Specifications
The specifications in this page are only for the thermoTANKA bottles and do not include the lid or kooler cover specs. To view the material specifications for other product parts for this bottle, please visit each product page.
This product is made from Stainless Stainless 304 18/8 (1.4301), Austenitic steels.
The material contains 18% Chromium and 8% Nickel
The product material is FREE from Lead and other contaminants.
This product does not contain an internal coating and is FREE from any other chemicals.
Stainless Steel Origin: China
Bottle Weight: 712grams +/- 5g
Bottle Opening: 67.5mm
Bottle thickness outter layer: 0.5mm +/- 0.02 (material used)
Bottle thickness inner layer: 0.4mm +/- 0.02 (material used)
Painting Types
Painted bottles are painted with a non-toxic environmentally friendly BPA & BPS paint.
Bottle paint finishes types: Standard transparent finish, solid matt or gloss finish and powder coating with matt, gloss or textured finish.
Logo Printing Types
Silk Screen Printing (coloured logo): Printed using a high quality non-toxic environmentally-friendly German paint/ink. A hardener is also added to the paint/ink to make it set stronger and more durable.
Black laser printing: Laser printed to stainless steel finish only, etches the logo in a black/dark brown colour on the bottle that will never come off.
White laser printing: Laser printed to both stainless steel finish and painted bottles, etches the logo in a stainless colour variation on the bottle that will never come off. White laser printing gives a nice silver colour logo colour to painted bottles.
ECOtanka values quality and safety. In order to make sure that our products are 100% safe and long-lasting, we test all of our material parts that come in contact with liquid or food. Material testing is done in stages with the first major test completed by a certified independent testing lab, this is completed every 4-5 years. The second test is completed by the wholesale supplier of the raw material or the main production factory a certified independent testing lab. The third test is carried out by our own team using a number of methods as follows:
1. A stainless steel liquid colour test to confirm the stainless steel type.
2. A spectrometer test which takes an analysis of the material makeup to verify its quality.
The materials we test are as follows:
- Stainless Steel for Bottle material
- Silicone for Seal material
- PP for Plastic Lid material
- Stainless Steel for Lid material
Our testings are mostly as per EU standards. From time to time, we carry out FDA testing as well. As testing samples, we provide one product type for each material category.
To view our latest test results, please click on the following document below:
2018, July SGS Report
2018, July BV BPA & BPS Report
Care Instructions:
ECOtanka bottles are very easy to care for: simply wash and rinse well the same as for your dishes. Alternatively, baking soda and warm water can be used to cleanse and freshen your bottle. They may be sterilised with boiling water. Do not place this bottle in the freezer.
We strongly do not advise putting this bottle in the dishwasher. The dishwasher could affect the insulation (vacuum) property of the bottle and shorten its life. For more detailed care instructions, please click here.
Packaging
The packaging for all ECOtanka products is 100% Plastic-FREE and environmentally-friendly. From Factory to End Consumers, Less Packaging Waste.
To learn more about our packaging, please click here.
2 Year Warranty
All ECOtanka products come with a 2-year warranty against faulty manufacturing. If you have a problem with your bottle or lid, you can contact us or find out more information here: support.ecotanka.com
Summer Tip:
To make a drink that stays cool for hours in summer, fill your bottle with ice cubes, top with water. The thermoTANKA bottle has a very big wide mouth, allowing ice cubes to be used for an instant cold drink. Please do not place your ECOtanka 2L thermo bottle in the fridge or freezer it will not work.
Find the closest shop or online store to your loction
through our global "Where to Buy" directory system.